LARGE DUAL DIAPHRAGM TUBE MIC
P820TUBE
SPECIAL ORDER
Out of stock, please contact JPRO for delivery ETA
2 Years WARRANTY
The AKG P820 Tube high-performance multipattern tube microphone is an excellent tool for highlighting lead vocals, brass instruments, electric guitars and drums. With its dual one-inch diaphragm capsule and the advanced ECC83 dual-triode circuitry, the AKG ...
The AKG P820 Tube high-performance multipattern tube microphone is an excellent tool for highlighting lead vocals, brass instruments, electric guitars and drums. With its dual one-inch diaphragm capsule and the advanced ECC83 dual-triode circuitry, the AKG P820 Tube delivers real tube sound and raises the bar in its class of affordable tube microphones.
APPLICATION EXAMPLES
- Professional Studios
- Project Studios
FEATURES
- Elegant remote control allows choice of nine different polar patterns
- Switchable bass-cut filter eliminates rumble or footfall noise
- Switchable attenuation pad for high SPL applications up to 155 dB SPL
SPECIFICATIONS
- Capsule 1” dual capsule condenser
- Polar Pattern 9 selectable polar patterns
- (selectable on remote control unit)
- Frequency Response 20 Hz to 20 kHz (see frequency response trace
- on the AKG webpage)
- Sensitivity (Cardioid) 20 mV/Pa (-34 dBV)
- Max. SPL for 0.5 % THD 135/155 dB (0/-20 dB pad)
- Equivalent Noise Level To IEC 60286-4 16 dB (A)
- Signal To Noise 78 dB (A) re 1Pa
- Preattenuation Pad -20 dB (selectable on remote control unit)
- Bass Cut Filter 80 Hz, 12 dB/octave (selectable on remote control unit)
- Electrical Impedance = 200 Os
- Recommended Load Impedance = 1000 Os
- Microphone to remote control unit dedicated 7-pin male XLR
- Audio output connector 3-pin XLR (pin 2 hot)
- Temperature Range -10 °C to +60 °C (14 °F 140 °F)
- Diameter 54 mm (2.13 in.)
- Length 212 mm (8.3 in.)
- Net Weight (Mic Only) 765 g (27 oz.)
- Shipping Weight 5340 g (188.4 oz.)
- Box Dimensions (L x W x H) 41 x 34 x 15 cm (16 x 13.4 x 6 in)
- Powering 210-240 VAC or 110-120 VAC (selectable)
- Primary fuse 125 mA / 250 V slow-blow
