CEILING SPEAKER GRILLE SAFETY TETHER PK
MTC-CSTETH1
SPECIAL ORDER
Out of stock, please contact JPRO for delivery ETA
2 Years WARRANTY
By special order only. This retrofit safety tether works with JBL press-in-grille type ceiling loudspeakers (Control 10 Series, 20 Series, 40 Series, and 226). If a grille were to work its way loose, the tether is intended to catch it ...
By special order only. This retrofit safety tether works with JBL press-in-grille type ceiling loudspeakers (Control 10 Series, 20 Series, 40 Series, and 226). If a grille were to work its way loose, the tether is intended to catch it and keep it from falling to the ground where it could otherwise cause damage or harm.
The tether consists of a short length of flammability-rated aramid tether cord and an adhesive tab. The thread end attaches through the perforated holes on the press-in grille, and the tab has a peel-off adhesive, making it easy for the installer to stick it onto the speaker baffle.
The tether consists of a short length of flammability-rated aramid tether cord and an adhesive tab. The thread end attaches through the perforated holes on the press-in grille, and the tab has a peel-off adhesive, making it easy for the installer to stick it onto the speaker baffle.
FEATURES
- Tether Cord: Stranded Aramid Fibre: High Temperature: 204°C; Low Temperature: -196°C
- Tab: Phenolic Resin FR-1 with 3M 5611A VHB pressure sensitive adhesive (full adhesion in 24 hours)
- Flammability: Tether Cord ASTM D6413, non-igniting &self-extinguishing; Baffle Tab UL94-V0
- Pull Rating: 3 kg (min. 10:1 safety factor on all JBL Pro press-in grille)
- Length: 220 mm (8.6 inches)
Resources
Specifications
PDF 16 B